Xerox EX7750 User Manual
5
5-9
Network Setup
Adapters/Ports
In local Setup only, the installed network boards are displayed. You cannot change this
information. From remote Setup, you can enable Ethernet. These options are
described in the following section.
information. From remote Setup, you can enable Ethernet. These options are
described in the following section.
Ethernet (Port Setup)
Enable Ethernet
—Select to connect the EX7750 to an Ethernet network.
Transmission Speed
—Select an appropriate setting according to the settings of the
network to which the EX7750 is connected.
N
OTE
:
When you select Auto Detect, make sure that the auto-negotiation settings for
speed and duplex are configured for the network port to which the EX7750 is
connected. Similarly, when you select a different setting such as 100 Mbps
Full-Duplex, make sure the same settings are configured for the network port.
connected. Similarly, when you select a different setting such as 100 Mbps
Full-Duplex, make sure the same settings are configured for the network port.
N
OTE
:
The 1 Gbps (gigabit per second) setting is full-duplex.