Xerox 7750 User Manual

The Xerox TCP/IP Printer Port Wizard guides you step-by-step through the following 
procedures:

■

Choosing a name for the new port

■

Identifying a printer by its DNS Name or IP Address

■

(Alternatively) Identifying a printer using the automatic Printer Discovery feature

To install the printer port:

Click Next to proceed with the port installation. The wizard verifies the port name and 
printer address, then configures the remaining port settings for you. Any errors detected in 
printer identification are displayed in a dialog box requesting Additional Information.

In the Add Xerox TCP/IP Port dialog box;:

■

Enter a unique name for the port being added in the Enter a Port Name section.

■

Enter the printer’s host name or IP Address in the Enter a Printer Name or IP 
Address section.

Click Next.To locate Xerox printers on your local area network, select Auto Printer 
Discovery, then click Refresh. The Xerox TCP/IP Port Monitor searches the network for 
Xerox printers and displays them in a list. Select the desired printer from the list, then 
click OK.

Select one of these options:

■

Click Finish to complete the printer port setup.

■

Click Back to change the settings. When you have completed the changes, click 
Finish to complete the printer port setup.

Click OK to exit Printer Properties.

This troubleshooting section assumes you have completed the following tasks:

■

Loaded a Phaser printer PCL or PostScript printer driver.

■

Printed and kept a current copy of the “Configuration Page”. For information about 
printing a “Configuration Page”, go to 

Reference/Features/Front Panel 

on the User 

Documentation CD-ROM.