Xerox 7750 User Manual

The print-quality mode and TekColor

 

correction directly control the quality of your prints. You 

can change these settings in the printer driver or at the printer’s front panel.

Driver settings override the printer’s front panel settings.

For more information on using color, go to 

Reference/Printing/Using Color

 on the User 

Documentation CD-ROM.

Color calibration procedures adjust the printer for optimal color output. Color settings may 
need adjustment upon initial printer setup or when toner cartridges and imaging units are 
replaced. There are two procedures: Lighten/Darken Colors and Balance Colors. If the overall 
image appears either too light or dark, use the Lighten/Darken Colors procedure. If a finer 
adjustment of the primary colors (cyan, magenta, and yellow) is needed, continue with the 
Balance Colors procedure.

The Lighten/Darken Colors procedure increases or decreases all primary colors (cyan, 
magenta, yellow, and black) to produce a lighter or darker image. 

The Lightness Level affects all prints for all users. Changing this setting is generally not 
recommended.

Colors appear faded or too dark.

Calibrate the printer’s colors. Calibrating adjusts 
the printer’s color balance and lightness level. 

At the printer’s front panel, select 

, select 

select 

, then

select 

. 

Follow the instructions on the Tutorial Page to 
balance colors or lighten/darken colors.