Xerox Phaser 6280 User Manual
Description of Menu Items
Phaser® 6280 Printer
98
USB Setup
Use USB Setup for setting the USB port’s status.
System Setup
System Setup menu is used to make the printer operation settings, such as for alarm and
power saver mode.
power saver mode.
Item
Description
Port Status
Select either Enable or Disable.
Adobe Protocol
Specifies the PostScript communication protocol: Standard,
BCP, TBCP, Binary, or Auto.
BCP, TBCP, Binary, or Auto.
Item
Description
PowerSaver Timer
Specify the transitional time to Power Saver between 5 and 60 minutes in increments
of 1 minute.
of 1 minute.
•
5 min. to 60 min. (default: 30 min.)
•
For details, refer to
Audio Tones
Specifies whether to turn on the alarm when an error occurs in the printer. You cannot
adjust the sound volume.
adjust the sound volume.
•
Control Panel (default: Off)
•
Invalid Key (default: Off)
•
Machine Ready (default: Off)
•
Job Complete (default: Off)
•
Fault Tone (default: Off)
•
Alert Tone (default: Off)
•
Out of Paper (default: Off)
•
Low Toner Alert (default: Off)
•
Base Tone (default: Off)
Fault Time-Out
Sets the fault time-out function.
Time-Out
You can cancel a printing process when it goes beyond a set time period. Set the time
until the print job is canceled. When this timeout expires, the print job is canceled.
until the print job is canceled. When this timeout expires, the print job is canceled.
•
5 sec. to 300 sec. (default: 30 sec.)
Specifies the amount of time in increments of 1 second the printer waits for
additional data before it cancels the job.
Specifies the amount of time in increments of 1 second the printer waits for
additional data before it cancels the job.
•
Off
Cannot cancel.
Cannot cancel.