Xerox Phaser 6022/NI User Manual
Maintenance
92
Xerox
®
Phaser
®
6022 Printer
User Guide
Adjusting the Fuser
Use Adjust Fuser for optimum print quality across a wide range of paper types. If the toner on a print is
smearing or can be rubbed off the paper, increase the offset for the paper you are using. If the toner is
blistered or mottled, decrease the offset for the paper you are using.
To adjust the fuser:
1.
1.
At the printer control panel, press the Menu button.
2.
Use the Up and Down arrows to navigate to Admin Menu, then press OK.
3.
Navigate to the Maintenance Menu, then press OK.
4.
Select Adjust Fusing Unit, then press OK.
5.
To select the paper type for the adjustment, use the Up or Down arrow buttons, then press OK.
6.
To increase or decrease the amount of offset, press the arrow buttons, then press OK.
7.
Repeat this procedure for each paper type you need to adjust.
8.
To return to the main menu, press the Return button.
Refreshing the Bias Transfer Roller
Use the BTR Refresh procedure to reduce paper curling and improve paper discharge.
To refresh the bias transfer roller:
1.
1.
At the printer control panel, press the Menu button.
2.
Use the Up and Down arrows to navigate to Admin Menu, then press OK.
3.
Navigate to the Maintenance Menu, then press OK.
4.
Select BTR Refresh, then press OK.
5.
Select On, then press OK.
6.
To return to the main menu, press the Return button.
Adjusting the Altitude
Use Adjust Altitude to adjust the altitude to match that of the location where the printer is installed. If
the altitude setting is incorrect, it can cause print-quality problems.
To adjust the altitude:
1.
1.
At the printer control panel, press the Menu button.
2.
Use the Up and Down arrows to navigate to Admin Menu, then press OK.
3.
Navigate to the Maintenance Menu, then press OK.
4.
Select Adjust Altitude, then press OK.
5.
To select the altitude of the location of the printer, press the arrow buttons, then press OK.
6.
To return to the main menu, press the Return button.