Xerox P12 User Manual
8
•
Chapter 1
1-4-4
Interface cable
The printer is equipped with:
•
36-pin female port (IEEE-1284)
The mating connector is an Amphenl connector, part number 57-0360,
or equivalent. The maximum length of the cable is 6 feet (2 meters)
and must be shielded to meet requirements of emission standards
requirements.
or equivalent. The maximum length of the cable is 6 feet (2 meters)
and must be shielded to meet requirements of emission standards
requirements.
☞
☞
☞
☞
Appendix B Pin Configuration
1-4-5
Printer software requirements
■
To use the printer software designed for use with Microsoft
®
Windows
®
, you will need:
•
A 486SX 25MHz or better personal computer
(Pentium recommended)
•
A 1.44 MB 3.5-inch floppy disk drive
•
At least 4 MB (6 MB recommended) of RAM for use with
Windows 3.1 or 3.11
•
At least 8 MB of RAM for use with Microsoft
®
Windows
®
95
•
Microsoft
®
Windows
®
3.1, 3.11, or 95
☞
☞
☞
☞
2-2 Installing Printer Software, for details on the required disk
space.
space.
■
To use the CD-ROM, in addition to the requirements listed above,
you will need:
you will need:
•
A CD-ROM drive
•
Additional RAM, if needed for CD