Xerox NC60 User Manual

❖

This section describes areas where media could jam and 
gives basic instructions for clearing jams in each of these 
areas. Use these instructions to safely remove jammed 
media from your printer. The printer is designed to 
automatically shut down when a jam occurs, but will 
resume your print job at the point at which it was 
interrupted after the jam has been cleared.

You can greatly reduce the incidence of media jams by 
following these simple guidelines.

• Use media that is in good condition (not torn, 

wrinkled, or moist).

• Use recommended types, amounts, sizes, and weights 

of media. (Refer to Chapter 2: Loading Print Media.)

• Load all media properly, and make sure that it is 

properly oriented for printing. (You can also try 
turning the media over if jams occur.)

• Fan paper before loading into the tray.

• Select the correct Media Type in your printer driver.