Xerox N2825 User Manual

❖

Paper size/type mismatch occurs when the requested size 
is not available in the printer. This can be caused by 
running out of paper in a tray that is configured for the 
requested paper, or by requesting a paper that is not 
configured in the printer. The printer goes off-line under 
paper mismatch conditions. It automatically returns 
on-line and continues printing after the paper mismatch 
condition is resolved.

If a tray is configured for the requested paper, but the tray 
is out of paper, the display prompts you to load the 
requested paper (size and type) in the appropriate tray. 
After the tray is loaded, printing continues.

If the request is for paper that is not configured in the 
printer, you are prompted to load the requested paper in 
the first tray of the Tray Sequence setting.

If you do not want to load paper in the first tray of the 
Tray Sequence setting, two options are available:

• One of the trays may be loaded with the requested size 

paper and reconfigured via the Tray Menu to match 
the requested paper type. (See Table 1.11 on page 1-24 
for instructions on using the Tray Menu.)

• Value Up or Value Down may be pressed to scroll 

through all the trays, displaying the size and type 
paper in each tray. If one of these alternate papers is 
acceptable, pressing Enter will cause printing to 
continue on the new paper. Trays are searched in the 
order specified in the Tray Sequence setting.