Xerox N2825 User Manual
Hard Disk Drive
6-42
❖
System Administrator Guide
5
Remove the access cover by (1) pulling it out at the
bottom, (2) lifting it up slightly, then (3) pulling it away at
the top.
bottom, (2) lifting it up slightly, then (3) pulling it away at
the top.
6
Pull out gently on the hard drive and remove it from the
controller board.
controller board.
You may need to rock it from side to side to free it
from the connector and the support posts.
from the connector and the support posts.
7
Replace the controller board’s access cover by (1) pushing
it in at the top, (2) sliding it down, and (3) aligning it with
the screw holes.
it in at the top, (2) sliding it down, and (3) aligning it with
the screw holes.
8
Secure the access cover with its screws.
2
1
3
1
2
3