Xerox 701P47301 User Manual

1. Open the [IPS Manager] Tray Mappings tab.

2. Load the Job Profile for the job, or verify that the correct stocks 

are assigned to the Virtual and Physical Trays.

3. Ensure that the necessary physical stocks are loaded. If not, 

load the necessary stocks in the appropriate trays.

4. Review the Tray Type information in the IPS Manager 

Physical Tray assignment dialog, and ensure that the media 
selections are appropriate for the fusibility of the physical tray.

5. Review and, if necessary, update the Tray Type settings in the 

IPS Manager Virtual Tray mapping dialog to ensure that the 
host will treat the virtual trays correctly as Fuser or Inserter 
Trays. The physical and virtual tray dialog Tray Type columns 
will only be available, if there is at least one non-fusing 
physical tray.

6. When Virtual Trays are flagged as Inserter, the user must 

ensure that the media selected for the non-fusing tray, or 
trays, matches the attributes expected for the non-printing 
pages (e.g. inserts or slip sheets) generated by the 
application. 

If an application requires the same stock to be fed from both fuser 
and non-fusing trays, and the product supports this capability, 
configure the IPS Manager Tray Mappings, as described below.

NOTE: Some products supported by Xerox FreeFlow® Print 
Server do not allow the same stock to be assigned to both fusing 
and non-fusing trays.

To feed blank or pre-printed stock without print data, from both 
fusing and non-fusing trays: 

1. Assign the stock to the desired fuser and non-fusing physical 

trays in the Printer Manager

2. Assign the stock to the desired fuser and non-fusing physical 

trays, in the IPS Manager Tray mappings dialog

3. Assign the stock to a single virtual tray

4. Set the Tray Type for the virtual tray to Inserter.

T

o use the same stock for both printed and unprinted pages: 

1. Assign the stock to the desired fuser and non-fusing physical 

trays in the Printer Manager.

2. Assign the stock to the desired fuser and non-fusing physical 

trays in the IPS Manager Tray mappings dialog.