Xerox 92C User Manual
System Overview Guide
A-1
A.
Supplies
This appendix provides information and specifications for the
media you use with your Xerox DocuPrint 4850/4890/92C NPS/
IPS printer. Instructions for ordering supplies are also provided.
media you use with your Xerox DocuPrint 4850/4890/92C NPS/
IPS printer. Instructions for ordering supplies are also provided.
Consumable supplies (those that are depleted during operation
of the system), such as paper, dry ink, developer, fuser agent,
etc., must be ordered for your printer. It is important that an
adequate supply of these items be on hand for installation, and
that your supply be maintained afterwards.
of the system), such as paper, dry ink, developer, fuser agent,
etc., must be ordered for your printer. It is important that an
adequate supply of these items be on hand for installation, and
that your supply be maintained afterwards.
Paper and other throughput stocks
The success of any print run is greatly dependent on the proper
selection, care, and handling of the stock used.
selection, care, and handling of the stock used.
Selecting paper
You need to select your paper carefully. If you do not use the
proper paper, you increase the probability of paper jams and
misfeeds. The stocks you use must meet the specifications set
forth by Xerox for operability in the printer. For additional
information about paper specifications, refer to Helpful Facts
about Paper, delivered with your printer.
proper paper, you increase the probability of paper jams and
misfeeds. The stocks you use must meet the specifications set
forth by Xerox for operability in the printer. For additional
information about paper specifications, refer to Helpful Facts
about Paper, delivered with your printer.
Acceptable paper
stocks and sizes
Your 4850/4890/92C printer accepts the following standard size
cut-sheet papers:
cut-sheet papers:
•
US Letter: 8.5 by 11 inches / 216 by 279 mm
•
US Legal: 8.5 by 14 inches / 216 by 356 mm
•
A4: 8.27 by 11.69 inches / 210 by 297 mm