Xerox 92C User Manual

Page of 90
Supplies
A-6
System Overview Guide
Dry ink
Dry ink (also called toner) is the powder which forms the image 
on the printed page. There are six cartridges of black dry ink or 
three cartridges of colored dry ink in each carton. You should 
keep at least one extra cartridge on hand at all times. The 
disposable cartridges are easily changed with no mess. The 
consumption rate of Xerox dry ink is approximately one cartridge 
per 30,000 pages for black dry ink and 86,500 pages for colored 
dry ink. Use only dry ink that is specified for use in the DocuPrint  
4850/4890 printer, as described in the consumable supplies 
table.
NOTE:  Dry ink (toner) yields are based on 5% area coverage for 
black dry ink and 1.5% area coverage for colored dry ink. Your 
yield may vary, depending on coverage. 
Fuser lubricant
Fuser lubricant is a consumable item required by the printer. You 
should keep at least two boxes on hand for installation by the 
service representative. The consumption rate of Xerox fuser 
lubricant is approximately one tube per 120,000 pages. For 
product information, refer to the consumable supplies table in 
this appendix. 
Developer
Developer is not consumed by the printer but does have an 
effective life of approximately 300,000 pages per bottle, 
guaranteed by Xerox. Developer is a required item and must be 
kept on hand. 
Use only the developer specified for use in your 4850/4890/92C 
printer.
For colored inks, use the color developer specified for each color 
in the following table: