Xerox Network Laser Printers User Manual
Setting a SUBNET MASK at the Control Panel
Chapter 2: Connecting to Your Network
❖
2-15
Setting a SUBNET MASK at the
Control Panel
Control Panel
If your printer is connected to a WAN (Wide Area
Network) you may restrict user access by setting a Subnet
Mask.
Network) you may restrict user access by setting a Subnet
Mask.
1
Press Menu Up or Menu Down until you see:
M e n u s
E t h e r n e t M e n u
2
Press Item Up or Item Down until you see:
E t h e r n e t M e n u
S u b n e t M a s k
3
Press Value Up or Value Down. You will see:
S u b n e t M a s k
=
x x x . x x x . x x x . x x x
4
Press Value Up or Value Down to change the value of the
character above the cursor. The value is incremented or
decremented by 1 each time the key is pressed. Holding
down Value Up or Value Down causes continuous
scrolling through the values.
character above the cursor. The value is incremented or
decremented by 1 each time the key is pressed. Holding
down Value Up or Value Down causes continuous
scrolling through the values.
5
To change other characters in the Subnet Mask, press Item
Up or Item Down to scroll right or left respectively
through the character string, then press Value Up or
Value Down to change the value of the character above
the cursor (as in Step 4).
Up or Item Down to scroll right or left respectively
through the character string, then press Value Up or
Value Down to change the value of the character above
the cursor (as in Step 4).
If you are using the Xerox CentreDirect External Print Server
(External Ethernet Adapter) to connect your printer to the
network, you cannot use the control panel to set a subnet mask.
Use the telnet procedure that is described in the section for
Windows and Unix Operating Systems.
(External Ethernet Adapter) to connect your printer to the
network, you cannot use the control panel to set a subnet mask.
Use the telnet procedure that is described in the section for
Windows and Unix Operating Systems.