Xerox Network Laser Printers User Manual
Windows Troubleshooting
Chapter 4: Windows / Peer-to-Peer Network Setup
❖
4-23
Windows 95/98
Troubleshooting for
DocuPrint Network
Printers
This troubleshooting section assumes:
• You have verified the operation of the printer using the
procedures found in
.
• You have loaded a DocuPrint PCL or PostScript print
driver.
• You have printed and retained a current copy of the
Configuration Sheet.
1
Verify this item in the Ethernet Menu area of the
Configuration Sheet:
Configuration Sheet:
• NetBEUI Enable is set to On.
2
Verify that the NetBEUI PDL is properly set depending on
your driver.
your driver.
3
From a workstation desktop use the right mouse button
and select Network Neighborhood then with the left
mouse button select Properties from the cascade menu.
and select Network Neighborhood then with the left
mouse button select Properties from the cascade menu.
4
The Network dialog will appear. Select the Configuration
tab.
tab.
5
Check the list of installed network components for the
following items:
following items:
• Xerox Peer to Peer
• Client for Microsoft networks
• NetBEUI
6
If you have elected to run CentreWare DP, make sure of
the following:
the following:
• Novell Networks:
You are required to load Novell IntraNetWare Client or
Client for IPX printer discovery.
Client for IPX printer discovery.
• TCP/IP Networks:
No additional software is required but your printer
must have a valid TCP/IP address assigned.
must have a valid TCP/IP address assigned.