Xerox Network Laser Printers User Manual
Windows Troubleshooting
4-30 ❖
DocuPrint Technical Information Guide
Windows NT 4.0
Troubleshooting
Troubleshooting
(AppleTalk)
This troubleshooting section assumes:
• You have verified the operation of the printer using the
procedures found in
.
• You have loaded a DocuPrint PCL or PostScript print
driver.
• You have printed and retained a current copy of the
Configuration Sheet.
1
Verify this item in the upper left corner of the
Configuration Sheet:
Configuration Sheet:
• EtherTalk Name is correct.
2
Verify these items in the EtherTalk and Ethernet Menu
areas of the Configuration Sheet:
areas of the Configuration Sheet:
• Enabled: is set to Yes.
• Zone: contains the desired zone name or * (*=all zones).
3
From the server desktop, use the right mouse button and
select Network Neighborhood then with the left mouse
button select Properties from the cascade menu.
select Network Neighborhood then with the left mouse
button select Properties from the cascade menu.
4
The Network dialog will appear. Select the configuration
tab.
tab.
5
Check the list of installed network components for the
following item:
following item:
• AppleTalk Protocol
6
If you have elected to run CentreWare DP you must also
have loaded Novell NetWare Client 32, Novell NetWare
Client, a Novell server on the network, and an IPX/SPX
Compatible protocol component. You may also discover
printers that have been assigned a TCP/IP address.
have loaded Novell NetWare Client 32, Novell NetWare
Client, a Novell server on the network, and an IPX/SPX
Compatible protocol component. You may also discover
printers that have been assigned a TCP/IP address.
7
As required, install any components not listed and restart
the system.
the system.
8
Once rebooted, select the Start button and Settings, then
select the Printers folder. The printers window will appear.
select the Printers folder. The printers window will appear.