Xerox Phaser 3260DNI User Manual

Overview

Xerox

®

 Phaser

®

 3052/3260

User Guide

130

Overview

This section provides information on what to do if a problem occurs with your machine. Follow this 
problem-solving procedure:

1.

When the machine status light changes or an error occurs, follow the steps indicated in this 
section to resolve the problem.

2.

If the problem cannot be resolved, power off and on, and try the job again. 

3.

If the problem persists, call for service. 

Machine Status Indicators

The color of each Status LED on the control panel indicates the machine’s current status in several 
areas of operation. The table below describes how to interpret each LED and its status indicators.

None

Off

The machine is offline.
The machine is in power save mode.

Green

On

The machine is on-line and ready to be used.

 Blinking

Blinking slowly: The machine is receiving and printing 
data.
Blinking rapidly: the machine is printing data.

Red

Blinking

A minor error has occurred and the machine is waiting 
for the error to be cleared. When it clears, the machine 
resumes.

On

• A cover is open. Close the cover.
• There is no paper in the tray. Load paper in the tray. 

(See 

Paper and Media

.)

• The machine has stopped due to a major error. 

Reboot the power and try the print job again. If the 
problem persists, call for service. 

• The Drum Cartridge has almost reached its 

estimated life. It is recommended to replace the 
Drum Cartridge now. (See

 Replacing the Drum 

Cartridge

.)

Orange

Blinking

Upgrading firmware.

On

A paper jam has occurred (See 

Clearing Paper Jams.

)