Xerox Phaser 3260DNI User Manual

Wireless Connectivity

Xerox® Phaser® 3052/3260
User Guide

14

Wireless Connectivity

This chapter identifies the key settings that you can customize to meet your requirements. Changing 
these settings is easy and will save you time when using the machine.

Note: 

Some options may be unavailable depending on your machine configuration. 

The Phaser 3052NI, 3260DI, and 3260DNI are compatible with 802.11 (Wi-Fi

®

) wireless networks. 

The location where the machine is installed must be covered by an 802.11 wireless network. This is 
typically provided by a nearby wireless access point or router, which is physically connected to the 
wired Ethernet that serves the building.

The machine supports connectivity via a wireless only connection if required. The machine will 
automatically configure wireless networking when powered on. 

Note: 

The machine will not connect to the wireless network while the network cable is attached. 

There are several ways to configure Wireless Connectivity:

•

Using CentreWare Internet Services. For instructions, refer to 

Configure Wireless 

Connectivity Using CentreWare Internet Services (Phaser 3052NI, 3260DI, and 3260DNI)

. 

•

With  the  Wireless Setting Program. For instructions, refer to 

Wireless Setting Program

. 

Note: 

Performing the driver installation at this time may aid wireless setup. Refer to 

Printer 

Drivers

.

To set the Ethernet Speed using CentreWare Internet Services, refer to 

Setting the Ethernet Speed 

Using CentreWare Internet Services

.

Print a Configuration Report

The Configuration Report details the machine software versions and network settings configured for 
the machine.

At the printer control panel, press the Cancel button for more than 4 seconds and then release it.