Xerox Phaser 3260DNI User Manual
Network Installation: TCP/IP
Xerox® Phaser® 3052/3260
User Guide
User Guide
20
Network Installation: TCP/IP
These instructions show you how to configure the following via CentreWare Internet Services:
•
TCP/IP v4 and v6
•
Domain Name
•
DNS
•
Zero Configuration Networking
The machine supports TCP/IP versions 4 and 6. IPv6 can be used instead of or in addition to IPv4.
IPv4 and IPv6 settings can be configured via a Web browser using CentreWare Internet Services.
IPv4
1.
At your workstation, open the Web browser and enter the IP Address of the machine in the
Address Bar.
Address Bar.
2.
Press Enter.
3.
Select Properties.
4.
If prompted, enter the Administrator User Name (admin) and Password (1111), and select Login.
Click Properties.
Click Properties.
5.
In the Network Settings link select TCP/IPv4 from the directory tree. The TCP/IPv4 page displays.
6.
In the Assign IPv4 Address menu, select Automatically or Manually.
7.
If Manually is selected, in the TCP/IP Settings area enter details of the machine in the following
fields:
fields:
a.
IPv4 Address
b.
Subnet Mask
c.
Gateway Address
If Automatically is selected, select BOOTP or DHCP.
Notes:
•
If BOOTP or DHCP mode is selected, you cannot change the IP Address, Network Mask,
or Router/Gateway Address. Select Auto IP if required.
or Router/Gateway Address. Select Auto IP if required.
•
New settings will not be applied until the machine is rebooted. Changing the machine’s
TCP/IP setting may cause you to lose your connection to the machine.
TCP/IP setting may cause you to lose your connection to the machine.