Xerox 6605/DNM User Manual
Installation and Setup
Xerox
®
WorkCentre
®
6605 Color Multifunction Printer
39
User Guide
Connecting to a Computer Using USB
To use USB, you must have Windows XP SP1 and later, Windows Server 2003 and later, or Macintosh OS
X version 10.5 and later.
To connect the printer to the computer using a USB cable:
1.
1.
Ensure that the printer is turned off.
2.
Connect the B end of a standard A/B USB 2.0 cable to the USB Port on the back of the printer.
3.
Attach the power cord and then plug in the printer and turn it on.
4.
Connect the A end of the USB cable to the USB Port on the computer.
5.
When the Windows Found New Hardware Wizard appears, cancel it.
6.
You are ready to install the print drivers. For details, see
Installing the Software
on page 109.
Connecting to a Wired Network
1.
Ensure that the printer is turned off.
2.
Attach a Category 5 or better Ethernet cable from the printer to the network or router socket. Use
an Ethernet hub or router, and two or more Ethernet cables. Connect the computer to the hub or
router with one cable, then connect the printer to the hub or router with the second cable. Connect
to any port on the hub or router except the uplink port.
3.
Attach the power cord, then plug in the printer and turn it on.
4.
Set or automatically discover the network IP address of the printer.
For details, see
Assigning the IP address of the printer
on page 51.
Connecting to a Wireless Network
A wireless local area network (WLAN) provides the means to connect two or more devices in a LAN
without a physical connection. The printer can connect to a wireless LAN that includes a wireless router
or wireless access point. Before connecting the printer to a wireless network, the wireless router must be
configured with a service set identifier (SSID), a passphrase, and security protocols.
Note:
Wireless networking is available only on printers with the optional Wireless Network Adapter
installed.