Xerox t 180 User Manual
XEROX DOCUPRINT 180 LPS SYSTEM GENERATION GUIDE
2-1
2.
2
Sysgen commands
This chapter explains the commands used for performing sysgens.
Sysgen Command menu
The Sysgen Command menu, illustrated in table 2-1, appears on the
printing system display screen when you boot the sysgen processor.
It also appears when COMMANDS is entered following the sysgen
prompt character.
printing system display screen when you boot the sysgen processor.
It also appears when COMMANDS is entered following the sysgen
prompt character.
Note:
The command HOSTCOPY option appears in your Sysgen
Command menu.
The interactive dialogue for a particular procedure may vary slightly
depending upon the release medium (tape or cartridge), input
method (online or offline), and product configuration.
depending upon the release medium (tape or cartridge), input
method (online or offline), and product configuration.
Command functions
The commands in Table 2-2 may appear in the Sysgen Command
menu, depending upon the hardware options present on your
system. Command abbreviations are underlined.
menu, depending upon the hardware options present on your
system. Command abbreviations are underlined.
Table 2-1.
Sysgen Command menu
**** SYSGEN PROCESSOR, VERSION M0.0 ****
COMMAND
COMMANDS
Display commands
BOOT
Boot the operating system
SYSGEN
Build or update system files
on disk from tape or host
on disk from tape or host
FORMAT
Clear and format disk pack
HOSTCOPY
Copy user files from host to
disk
disk
AUTO
Auto sysgen
MINI
Configuration change only
ERASE
Erase all files
Enter Cmd (’C’ for Menu)>