Xerox XE60 User Manual

The Printer Driver Installation software cannot be installed using the Control
Panel/Printers for Win 3.1x or the Add Printer Wizard for Win
95/98/NT4.0.  Please use one of the following methods depending on your
operating system.

2.  Plug the IEEE-1284 cable into the

parallel port on the WorkCentre.

3.  Plug the other end of the IEEE-1284

cable into the computer.

4.  Turn on the PC.

5.  Start Windows on your computer.

6.  Insert the WorkCentre XE CD-ROM into the CD-ROM Drive.

7.  For Installation of 3.1x:

Choose File from the menu bar in Program

Manager, and then choose the Run… command.

 For 

Click on the Start

button and then choose the Run menu option.

8.  Type D:\SETUP (or the appropriate drive letter depending on your CD-

ROM Drive) in the command line box.  Click on the OK button to
proceed.

9.  Follow the on-screen instructions.

10.  For Installation of Windows 3.1x:

When the install is complete,

ensure that the power cord is plugged into the WorkCentre and then
into a grounded outlet.  Restart Windows and turn on the WorkCentre.

For Installation for NT 4.0, 95 or 98

 When the installation is

complete, ensure that the power cord is plugged into the WorkCentre
and then into a grounded outlet.  You will be asked whether or not to
print a test page.  If you wish to do so, load paper, turn on the
WorkCentre and then click the Yes button.