Xerox WorkCentre 3655/X User Manual

Page of 220
Copying 
 
96 
Xerox® WorkCentre® 3655 Multifunction Printer 
 
User Guide 
 
Copying an ID Card 
You can copy both sides of an ID card or small document onto one side of paper. Each side is copied 
using the same location on the document glass. The printer stores both sides and prints them side by 
side on the paper. 
To copy an ID card: 
1.
  At the printer control panel, press the Services Home button. 
2.
  Touch ID Card Copy
3.
  For side 1, under the ID Card Copy tab, verify the paper supply, lightness/darkness, sharpness, and 
auto suppression background settings. Change the settings as needed. 
4.
  Lift the document cover. 
5.
  Place the ID card, or a document smaller than half the selected paper supply size, about 6 mm (.25 
in.) from the upper left corner of the document glass. 
6.
  Press the green Start button. 
7.
  Lift the document cover. 
8.
  For side 2, turn the document over and position it about 6 mm (.25 in.) from the upper left corner of 
the document glass. 
9.
  Touch Scan Side 2
10.
  To exit, press the Services Home button. 
11.
  Remove the ID card from the scanner.