Xerox 3270 User Manual

Function  1

Buffer Size

Function  7

Case

Function  14

Enable Graphics

Function  15

Baud Rate

Function  16

Number of Data Bits for Serial Input

Function  17

Parity for Serial Input

Function  18

Number of Stop Bits for Serial Input

Function  24

Port Selection

Function  38

IBM Communication Feature

Function  19

Duplex Printing (

  PCL & XES only)

Function  49

Restrict Access

Function  63

Define Logo ( 

 FSL & PCL only)

When you apply power to the  converter, the following procedure will
be executed:

1. The permanent memory will be read to determine whether it con-

tains valid data. If so, the data will be loaded into the temporary
memory and normal operation will be started on the basis of the
permanent settings.

2. If the data in the permanent memory area is unreadable, it will be

cleared. The factory defaults are then read, and an error message
will be printed containing a description of the action taken. See
the chapter on  Error Messages in the FSL and PCL
programmer’s guides. Operation starts on the basis of the factory
default settings.

3. The converter checks the printer. If the printer is malfunction ing,

the converter’s indicators will signal an error.