Xerox 3320/DNI User Manual

Troubleshooting

Xerox Phaser 3320DN/3320DNI
User Guide

94

Redistributing Toner

When the print cartridge is near the end of its life:

•

White streaks or light printing occurs. 

•

 or Replace new cartridge message appears on the display.

If this happens, you can temporarily improve print quality by redistributing the remaining toner in the 
cartridge. In some cases, white streaks or light printing will still occur even after you have redistributed 
the toner.

1.

Press the release latch on the left side of the machine.

2.

Open the front door.

3.

Pull the print cartridge out.

4.

Slowly shake the cartridge five or six times to distribute 
the toner evenly inside the cartridge. 

Note:

If toner gets on your clothing, wipe it off with a dry 

cloth and wash clothing in cold water. Hot water sets 
toner into fabric.

Do not touch the green underside of the print 

. Use the handle on the cartridge to avoid 

touching this area. 

Orange

Blinking

• A minor error has occurred and the machine is 

waiting for the error to be corrected. Check the 
display message. When the problem is resolved, the 
machine resumes.

• The print cartridge is near its estimated end of life. 

Prepare a new cartridge for replacement. You may 
temporarily increase the printing quality by 
redistributing the toner - see 

Wireless LED
(Phaser 3320DNI 
only)

Blue

On

This is the default setting. Also shows blue when the 
machine is connected to a wireless network. (Phaser 
3320 DNI only.)