Xerox Printer fwww User Manual

.1   

<Faxing (Phaser 6110MFP/XN only)>

(Phaser 6110MFP/XN only)

The fax feature is available only on the Phaser 6110MFP/XN. This 
chapter gives you information about using your machine as a fax 
machine. 

This chapter includes:

In some countries, you are required by law to indicate your fax number 
on any fax you send. The Machine ID, containing your telephone number 
and name or company name, will be printed at the top of each page sent 
from your machine.

Press Menu until System Setup appears on the bottom line of the 
display and press Enter.

Press Enter when Machine Setup appears.

Press Enter when Machine ID appears.

Enter your name or the company name using the number keypad.

You can enter alphanumeric characters using the number keypad, 
and include special symbols by pressing the 0 button.

For details on how to enter alphanumeric characters, see page 2.3.

Press Enter to save the ID.

Press the Scroll buttons until Machine Fax No. appears and press 
Enter

.

Enter your fax number using the number keypad and press Enter.

Press Stop/Clear to return to Standby mode.

Before starting a fax, change the following settings according to your 
original’s status to get the best quality.

The default document settings produce good results when using typical 
text-based originals. However, if you send originals that are of poor 
quality, or contain photographs, you can adjust the resolution to produce 
a higher quality Fax.

Press Resolution. 

Press Resolution or the Scroll buttons until the option you want 
appears.

Press Enter to save your selection.