Xerox WC PE120 Series User Manual

Paper Handling

3.8

If you want the machine to stack the printed pages on the 
rear output slot, open the rear door to use the rear output 

slot.

: Make sure to open the rear output slot when you print 

on transparencies. If not, they may tear while exiting the machine.

After printing, fold away the paper support extension and 
close the Bypass tray.

You can manually load a sheet of print material in the Bypass 

tray if you select Manual Feed in the Source option from the 

Paper tab when you change print settings to print a document. 

For details about changing print settings, see page 4.6. 

Manually loading paper can be helpful when you want to check 

print quality after each page is printed. 

This loading procedure is almost the same as the procedure for 

loading in the Bypass tray, except you load paper sheet-by-

sheet in the tray, send print data to print the first page, and 

press Enter on the control panel to print each following page.

Lower the Bypass tray and unfold the paper support 
extension.

Load a sheet of print material with the side to be printed 
on facing up.