Xerox WorkCentre 3655/S User Manual
Installation and Setup
36
Xerox® WorkCentre® 3655 Multifunction Printer
User Guide
Connecting to a Computer Using USB
To use USB, you must have Windows 7, Windows Server 2003, and later, or Macintosh OS X version 10.7
and later.
To connect the printer to the computer using a USB cable:
1.
1.
Ensure that the printer is turned off.
2.
Connect the B end of a standard A/B USB 2.0 cable to the USB Port on the back of the printer.
3.
Attach the power cord and then plug in the printer and turn it on.
4.
Connect the A end of the USB cable to the USB Port on the computer.
5.
When the Windows Found New Hardware Wizard appears, cancel it.
You are ready to install the print drivers. For details, see
Installing the Software
on page 40.
Connecting to a Telephone Line
Note:
Not all options listed are supported on all printers. Some options apply only to a specific
printer model, configuration, operating system, or driver type.
1.
Ensure that the printer is turned off.
2.
Connect a standard RJ11 cable, No. 26 American Wire Gauge (AWG) or larger, to the Line port on
the back of the printer.
3.
Connect the other end of the RJ11 cable to an operating telephone line.
4.
Enable and configure the Fax functions.
For details, see the
Turning the Printer On and Off
This printer has both a power switch and a power button. The power switch on the side of the printer
controls the main power to the printer. The control panel power button controls power to the printer
electronic components. The preferred software-controlled printer shutdown method is to press the power
button.
To turn on the printer:
•
•
Turn on the power switch.