Xerox 3117 User Manual
U
SING
P
RINT
M
ATERIALS
3.7
3
Using Manual Feed Mode
If you select Manual Feed in the Source option, you can
manually load paper in the tray. Manually loading paper can be
helpful when you want to check the print quality after each page
is printed.
If you experience a paper jam from the tray, load one sheet of
paper at a time into the tray.
1
Load the print material in the tray with the print side up.
Adjust the paper guide against the print material without
bending the paper.
2
When you print a document, you must select Manual Feed
for Source from the software application, and then select
for Source from the software application, and then select
the correct paper size and type. For details, see Software
User Guide.
3
Press the
button on the printer to start feeding.
Note: If you don't press the button after a pause, the paper will be
automatically fed into the printer.
4
Printing is started.
5
If you are printing multiple pages, load the next sheet after
the first page prints out, and press the
the first page prints out, and press the
button.
Repeat this step for every page to be printed.