Xerox 3435DN User Manual
8.4
<Maintenance>
3
Remove the new print cartridge from its bag.
Caution
Do not use sharp objects, such as a knife or scissors, to open
the print cartridge package. They might scratch the drum of
the cartridge.
the print cartridge package. They might scratch the drum of
the cartridge.
4
Remove the packing tape and roll the cartridge 5 or 6 items to
distribute the toner.
distribute the toner.
Thoroughly roll the cartridge to assure maximum copies per
cartridge. Save the box and the plastic bag for shipping.
cartridge. Save the box and the plastic bag for shipping.
Cautions
• If toner gets on your clothing, wipe it off with a dry cloth and
wash clothing in cold water. Hot water sets toner into fabric.
• To prevent damage to the print cartridge, do not expose it to
light for more than a few minutes. Cover it with a piece of
paper, if necessary.
paper, if necessary.
• Do not touch the green surface underside of the print
cartridge. Use the handle on the cartridge to avoid touching
this area.
this area.
5
Hold the print cartridge by the handle and slowly insert the cartridge
into the opening in the printer.
into the opening in the printer.
6
Tabs on the sides of the cartridge and corresponding grooves
within the printer will guide the cartridge into the correct position
until it locks into place completely.
within the printer will guide the cartridge into the correct position
until it locks into place completely.
7
Close the front cover. Make sure that the cover is securely closed.
Clearing the Toner Low Replace Toner message
When the Toner Low Replace Toner message appears you can
configure not to see this message again not to disturb you.
configure not to see this message again not to disturb you.
1
Press Menu until System Setup appears on the bottom line of the
display and press OK.
display and press OK.
2
Press the scroll buttons until Maintenance appears and press OK.
3
Press the scroll buttons until CLR Empty MSG. appears and press
OK.
OK.
4
Select On and press OK.
5
Now the Toner Low Replace Toner message does not appear but
the Replace Toner message will remain for reminding you that the
new cartridge needs to be installed for quality.
the Replace Toner message will remain for reminding you that the
new cartridge needs to be installed for quality.
Caution
Once you have selected On, this setting will be permanently
written to the memory of the print cartridge, and this menu will
be disappeared from the Maintenance menu.
written to the memory of the print cartridge, and this menu will
be disappeared from the Maintenance menu.
Maintenance parts
To avoid print quality and paper feed problems resulting from worn parts
and to maintain your printer in top working condition the following items
will need to be replaced at the specified number of pages or when the
life span of each item has expired.
and to maintain your printer in top working condition the following items
will need to be replaced at the specified number of pages or when the
life span of each item has expired.
Xerox highly recommends that an authorized service provider, dealer or
the retailer where you bought printer performs this maintenance activity.
The warranty does not cover the replacement of the maintenance parts
after their lifespan.
the retailer where you bought printer performs this maintenance activity.
The warranty does not cover the replacement of the maintenance parts
after their lifespan.
Items
Yield (Average)
Transfer roller
70,000 page
Pick-up roller
150,000 page
Fuser unit
80,000 page