Sunfire TGP-5 User Manual
User's Manual
45
CHAPTER 5
Tuner Operation
The Tuner is se lect ed either by
rotating the manual input selector on
the front panel, or by touching the
TUNER button in the re mote’s TGP-5
mode. The front panel display shows
the frequency of the last station you
were lis ten ing to.
the front panel, or by touching the
TUNER button in the re mote’s TGP-5
mode. The front panel display shows
the frequency of the last station you
were lis ten ing to.
The FM Tuner can tune sta tions
from 87.5 MHz to 108.0 MHz in 0.2
MHz steps (.05 MHz steps for some
in ter na tion al mod els). The AM Tuner
range is 530 kHz to 1710 kHz in 10
kHz steps (531 kHz to 1710 kHz in
9 kHz steps for some in ter na tion al
models).
MHz steps (.05 MHz steps for some
in ter na tion al mod els). The AM Tuner
range is 530 kHz to 1710 kHz in 10
kHz steps (531 kHz to 1710 kHz in
9 kHz steps for some in ter na tion al
models).
Tuner and the OSD
Page 35 shows how to set up the
Tuner using the on screen display.
Tuning Stations Manually
Use the front panel AM/FM button
to select either the AM or FM band,
and then use one of these three ways
to tune stations manually:
and then use one of these three ways
to tune stations manually:
1. Touch UP or DOWN mo men -
tari ly to change the tuner by
one frequency step.
one frequency step.
2. Hold UP or DOWN for a
second or so, then release to
start the scanning feature. The
TGP-5 will scan to the next
station, pause on it for a few
seconds to allow you to hear
what is offered there, and then
scan to the next, and so on.
Press ing UP or DOWN stops
the scanning process.
start the scanning feature. The
TGP-5 will scan to the next
station, pause on it for a few
seconds to allow you to hear
what is offered there, and then
scan to the next, and so on.
Press ing UP or DOWN stops
the scanning process.
3. Hold UP or DOWN for an
extended period to make the
tuner speed across the band
without stopping on a station.
The tuner will begin scanning
for stations when you release
the button. Press ing UP or
DOWN stops the scanning.
tuner speed across the band
without stopping on a station.
The tuner will begin scanning
for stations when you release
the button. Press ing UP or
DOWN stops the scanning.
4. When a station is tuned, it can
be set as a preset for easy re-
call, see "Setting the Presets"
in the next column.
call, see "Setting the Presets"
in the next column.
Recalling a Preset Station
Once you have selected the Tuner,
you can quickly recall a station by
press ing its preset number, either on
the remote’s numeric keypad, FAV
buttons, or the channel up and down
buttons.
press ing its preset number, either on
the remote’s numeric keypad, FAV
buttons, or the channel up and down
buttons.
Scanning Presets
To scan through the presets, press
and hold the FM/AM button. Touch it
again to stop the scan.
again to stop the scan.
Saving Presets:
1. Navigate to your favorite station
with the UP/DOWN buttons.
2. Press MEMORY once. The
preset choice will go to the next
available one.
available one.
3. Within 5 seconds, press
MEMORY again to save the
current frequency as a preset,
or else use the UP/DOWN
buttons to fi nd another preset
number, then press MEMORY
to save it.
current frequency as a preset,
or else use the UP/DOWN
buttons to fi nd another preset
number, then press MEMORY
to save it.
4. The UP/DOWN buttons usually
tune the frequency, but when
loading the presets, they navi-
gate the presets.
loading the presets, they navi-
gate the presets.
Preset
Station
AM FM NR
1
2
3
4
5
6
7
8
9
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
Record your favorite stations here: