Xerox 4500 ps eth User Manual

This chapter provides:

AS/400 definitions for ASCII printing

Once these parameters have been configured, and the basic TCP/IP
configuration of the  Xerox 4500 PS ETH has been completed, printing from
AS/400 will be possible. This will use the AS/400 Host Print Transform to
format and translate EBCDIC data, the command language used by the
printer selected on the AS/400.

If 3812-1 emulation is required then the TCP/IP connection described in the
“AS/400 SCS/DCA Printing using TCP/IP” section, should be considered.

If an SNA connection is required then the “AS/400 SCS Printing Using SNA”
chapter should be considered.

If IPDS printing is required, chapter 13 “PSF/400 AFP Printing Using
TCP/IP” should be considered.

Requirements:
- AS/400 version 3.1 with TCP/IP installed and a TCP/IP configured  Xerox

 The defined Output queue will be specified in print options when printing the

document.

The CRTOUTQ command is used to create a Remote output queue. This will
enable the AS/400 to automatically output data that has been translated by
Host Print Transform to the  Xerox 4500 PS ETH.

The following example shows the values required to create an output queue
called PSX3OUTQ.