Xerox 4500 ps eth User Manual
Configuration
Xerox 4500 PS ETH, Inst. & Operator's Guide
Xerox 4500 PS ETH, Inst. & Operator's Guide
62
NOTE:
Only the password for the current session can be changed.
If an invalid password is entered, the previous menu level
is displayed.
Only the password for the current session can be changed.
If an invalid password is entered, the previous menu level
is displayed.
3.5.6 Save Configuration
NOTE:
When you have made new settings or changed existing, you must
save the settings with this menu. Then reboot the printserver (see
section “Reboot PrintServer below). If you fail to do this the
new/modified settings will be lost when the printer is turned off.
When you have made new settings or changed existing, you must
save the settings with this menu. Then reboot the printserver (see
section “Reboot PrintServer below). If you fail to do this the
new/modified settings will be lost when the printer is turned off.
In the sub-menu for the “Configure PrintServer” select “Save
Configuration” by typing C at the selection prompts. You will see the
following screen:
Configuration” by typing C at the selection prompts. You will see the
following screen:
<PrintServer>
Save Settings
0xx.xxx
Saving current settings will overwrite default settings.
Enter “YES” to Save or “NO” to return without saving.
Save current Settings to Flash?
3.5.7 Restore Configuration
In the sub-menu for the “Configure PrintServer” select “Restore
Configuration” by typing D at the selection prompts. Follow the
instructions on the screen.
Configuration” by typing D at the selection prompts. Follow the
instructions on the screen.
3.5.8 Restore Factory Default
In the sub-menu for the “Configure PrintServer” select “Restore Factory
Default” by typing E at the selection prompts. Follow the instructions on
the screen.
Default” by typing E at the selection prompts. Follow the instructions on
the screen.