Xerox 4500 ps eth User Manual

1.

Perform a test printout by pressing the TEST key on the rear panel.

2.

Verify that the settings match the definitions in the BOOTPTAB file
and the bootfile. Appendix D contains settings printout.

3.

‘’PING’’ the unit from the workstation to verify physical LAN and IP
network connectivity.

a.

Invoke the PING command and the IP address or host name of
the unit. For example:

PING 192.0.110.1

b.

If the PING is OK, you receive a system response like this:

PING 192.0.110.1: 56 data bytes
64 bytes from 192.0.110.1: icmp_seq=0.  time=0.
ms
64 bytes from 192.0.110.1: icmp_seq=1.  time=0.
ms
64 bytes from 192.0.110.1: icmp_seq=2.  time=0.
ms
64 bytes from 192.0.110.1: icmp_seq=3.  time=0.
ms
64 bytes from 192.0.110.1: icmp_seq=4.  time=0.
ms

....
....

3.

Press CTRL-BREAK to end the PING process. You will then get the
following output statistics:

----192.0.110.1 PING Statistics ----
5 packets transmitted, 5 packets received, 0%
packet loss round-trip (ms)  min/avg/max 0/0/0