Xerox Inkjet Printer User Manual

13

A continuously lit LED can indicate any of the following error
conditions:

•

 

Out of paper – Fill the paper tray. Press and release the
Printer Control button to feed paper.

•

 

Paper Jam – Press and hold the Printer Control button for at
least 2 seconds to clear the jam. If the paper fails to come out,
follow the jam clearance procedure described on the Quick
Start Card.

•

 

Incorrect Print Head Installed – Press and release the
Printer Control button to center the print head. Replace the
incorrect print head with the correct DocuPrint C8 print head.

•

 

Out of Ink - Press and release the Printer Control button to
center the print head. Replace the empty ink cartridge with a
new cartridge. Press and release the Printer Control button to
return the print head to the home position.

•

 

Scan Error – Remove any obstructions from the scan path.
Press and release the Printer Control button to reset the printer
and return the print head to the home position. If the problem
is not resolved and the LED remains on, call the Xerox
Support Center at (1-800-832-6979).

•

 

System Error – Press and hold the Printer Control button for
at least 2 seconds. If the LED begins to flash, there is a system
error. Unplug the power at the back of the unit for at least 10
seconds, then reinsert the power cord back into the back of the
unit. If the problem still persists, call the Xerox Support Center
at (1-800-832-6979).

LED Blinking Intermittently (0.2 sec On, 1.4 sec Off)

•

 

Data in Buffer Press and release the Printer Control button to
print out the data resident in the buffer.