Xerox Inkjet Printer User Manual

59

The wrong type of transparencies
was used.

Use transparencies made for ink
jet printers only.

Transparency is not selected for
the Paper Type option on the
Paper/Output property page.

Make sure Transparency is the
selected Paper Type option on
the Paper/Output property page.
If the problem continues, select
the Page Setup command from
the application that you are using
to open the Paper/Output
property page, and select the
Transparency option located in
Paper Type.

The document was printed on the
wrong side of the transparency
film.

Remove the transparencies from
the paper tray, turn the sheets
over, and reinstall the sheets in
the tray. The rough side of the
film should face the back of the
printer.

Multiple transparencies are
stacked in the paper output shelf.

When printing multiple
transparencies, remove each
transparency from the paper
output shelf after it’s printed.