Xerox 840 User Manual

The printer calculates the broadcast address based on the IP address and 
the network mask.  However, the broadcast address can be viewed and set 
using the following procedure:

Press  

---->

 until 

Broadcast Address

 is displayed.  

Press 

; the front panel displays the broadcast address.  

Use 

 and  

---->

 as described in Steps 4d through 4f to set the 

broadcast address.  

When the broadcast address is set, use 

and 

 as described 

in Steps 4g and 4h to enter the broadcast address into the printer. 

Return the printer to normal operation.

Press

 Exit (the far left button) until the front panel displays 

Network 

Settings

.

Press 

Exit again.  

■

If you have changed any parameters that require a printer reset to 
take effect, you will be prompted to reset the printer.  If you press 

, the printer resets.  If you press 

, the front panel 

displays 

Network Settings

.  Press

 Exit (the far left button); the 

printer returns to normal operation, but the changes you have made 
will not take effect until the next time the printer is reset. 

■

If you have not changed any parameters that require a printer reset 
to take effect, the front panel displays 

Ready

.

When you set the IP addressing parameters from the front panel, the front panel 
selections for DHCP/BOOTP and RARP are automatically set to Disabled.

While 

Ready

 is displayed, press 

; the 

Printer

 menu is displayed:  

Press the left or right arrow buttons until the front panel displays 

Network 

Settings

.  

Press 

 to enter the 

Network Settings

 menu; 

Network Settings

 

appears on the top line of the display

.

If TCP/IP is not already displayed, press the right arrow button until the 
front panel displays 

TCP/IP

. 

Printer Menu

Help Pages               Menu       

Printer Menu

Network Settings            Menu