Xerox XES 8855 User Manual

The bypass feed mode is used
when the print, which is being
sent to the printer, is a
different size than the roll
media loaded in the printer.

For example:

You want to send a C size
print, but there is no C size
media loaded in the printer.
You can use the bypass feed
mode to run the C size print,
using cut sheet media.

When the correct media is not
loaded for an incoming print,
the Status Display shows the
flashing code P-05.

1.  Adjust the paper guides to

the correct size.

2.  Feed the cut sheet media

squarely into the printer,
curl side down and
between the guides, until
the media stops.

•

 The 

Status 

Display

indicates the size when the
media is loaded (05-xx).