Xerox 135MX Leaflet

For more information on the Xerox

DocuPrint

®

100/115/135 Enterprise

Printing Systems and PowerPlus Series,

call 1-800 ASK XEROX or visit us 

on the Web at: 

100/100MX • 115/115MX • 135/135MX EPS Specifications

• 

Enhanced Sun Blade

TM

platform

• 

DVD-ROM Drive, QIC tape

• 

Color flat panel display

• 

Keyboard and mouse

• 

Ethernet interface (10/100BaseT)

• 

Controller stand

• 

18/36-track tape drive (optional)*

• 

Xerographic engine with laser raster imaging system

• 

Prints simplex or duplex

• 

Monthly duty cycle: up to 3 million (DP 100), 3.5
million (DP 115), or 4 million (DP 135) impressions

• 

Printer control console shows current printer status

• 

Operator attention light

• 

Check performance guarantee

• 

Consistently exceeds 99.5% read rate

• 

Uniformity—maintain a signal strength across 
all characters

• 

Consistency—maintain uniformity from check to
check and under a range of environmental conditions 

• 

Durability—maintain image permanence in high-
speed readers/sorters

®

• Adobe 

PostScript

®

level 3, PDF, HP PCL6, TIFF, 

ASCII, VIPP

® 

Software

• LCDS/Metacode 

(option)

• 

NPS/IPS Extension (option):
- PostScript

®

level 2, HP PCL5e, ASCII, VIPP

®

, TIFF

- Emulates an IBM Printing Systems AFP Group 3

page printer with the AFIG (Advanced Function
Image and Graphics) option

•

DocuPrint

®

100: Up to 96 ppm. (8.5 by 11 in./A4)

•

DocuPrint

®

115: Up to 115 ppm. (8.5 by 11 in./A4)

•

DocuPrint

®

135: Up to 135 ppm. (8.5 by 11 in./A4)

•

Standard one perforator wheel

•

Perforate parallel to the direction of the paper path

•

Operate in static or dynamic mode

•

Edge to edge micro-perf

• 

16 to 110 lb. (60 to 200 gsm) cut-sheet paper weights

• 

7 by 10 in. (optional) to 14 by 17 in. (178 by 
254 mm to 356 by 432 mm including A4, A3, B4)
paper sizes

• 

Transparencies, label stock, tab stock, carbonless 
paper, pre-perforated stock, safety stock, and other
specialized application materials

Input:
• 

Main tray (tray 1): 1,100-sheet capacity of 20 lb. 
(80 gsm) stock

• 

Auxiliary tray (tray 2): 600-sheet capacity of 20 lb. 
(80 gsm) stock

• 

Two high-capacity feeders (trays 3 and 4): 2,600 
sheets each of 20 lb. (80 gsm) stock (standard)

• 

Up to two additional high-capacity feeders (optional):
2,600 sheets each of 20 lb. (80 gsm) stock input trays

• 

7 by 10 in. (178 by 254 mm) enablement kit: enables
feeding of paper as small as 7 by 10 in. (optional)

Output:
• 

Two high-capacity stackers (standard); up to two 
additional high-capacity stackers (optional). Each 
2,500-sheet capacity of 20 lb. (80 gsm) stock

• 

Sample tray: 100 sheets of 20 lb. (80 gsm) stock

• 

Purge tray: 100 sheets of 20 lb. (80 gsm) stock

• 

Bypass transport: enables connection to any DFA-
compliant, third-party inline finishing device (optional)*

• 

Supports connected or inline finishing equipment

• 

Printer automatically reprints damaged sets that
the finisher reports as defective 

• 

On-site upgrades without hardware changes to the
printer module

• 

Move from one configuration to another with MTI 
- 100 to 115 configuration 
- 100 to 135 configuration 
- 115 to 135 configuration 

®

LCDS:
- IBM Channel, Ethernet, TCP/IP, off-line tape
Network: 
- Ethernet: TCP/IP, Netware, AppleTalk
- Token Ring: TCP/IP, Netware, AppleTalk
NPS Extension (option):
- Ethernet: TCP/IP, Netware, AppleTalk
- Token Ring: TCP/IP, Netware AppleTalk

IPS Extension (option):
- Ethernet TCP/IP, Token Ring TCP/IP
- S/370 or S/390 bus and tag

• 

600-dpi input imaged at 600 x 2400 dpi

• 

300-dpi input converted to produce 
600 x 2400-dpi imaging

•

Recommended operating temperature: 
72° ±4°F (22° ±2°C)

• 

Minimum/maximum operating temperature: 
50° to 85°F (10° to 29°C)

• 

Minimum/maximum relative humidity: 45% ± 10%
(no condensation)

• 

Maximum normal altitude: up to 6,000 ft./1830 m
above sea level

• 

Audible noise level: meets 82dB noise exposure limit

• 

Heat dissipation, in Btu per hour
- System control module: 3,074 Btu
- Printer module: 4,454 standby; 28,140 operating

• 

System control: 100-240 VAC, 50-60 Hz, 12 amp

• 

Printer module: (one of possible configurations
listed below)
- Cord System: 120/208 VAC (2 Phase), 60 Hz, 

50 amp dedicated service

- Star: 220/380 VAC or 230/400 VAC or 240/415 

VAC (3 Phase), 50 Hz, 30 amp dedicated service

- Delta: 220 VAC or 230 VAC or 240 VAC (3

Phase), 50 Hz, 30 amp dedicated service

• 

Agency certification: UL, CSA, CE Mark

10.0 (254)

24.0 (610) 

17.9 (455) 

70 (32)

77.3 (1,963)

35.9 (911) 

55.0 (1,397) 

1,434 (651)

41.7 (1,060)

28.3 (719)

57.7 (1,466)

663 (301)

32.4 (822)

28.3 (719) 

57.7 (1,466)

521 (237)

32.4 (822)

28.3 (719) 

59.6 (1,513)

521 (237)

20.4 (518)

28.3 (719) 

56.1 (1,425)

176 (80)

The DocuPrint

®

PowerPlus Series EPS offers two enhancements that reduce costs

and increase productivity. The Internal Dynamic Perforator is the only solution to

selectively perforate documents inline. The Set Recovery Extension allows you to

automatically reprint documents in the event of finisher malfunction. 

©2004 XEROX Corporation. All rights reserved. XEROX

®

, DocuPrint

®

, DocuSP

®

, SquareFold

®

, FreeFlow

TM

, VIPP

®

and EOMS

TM

are trademarks of Xerox Corporation in the U.S. and/or other countries. Product appearance, configuration availability, build status and/or specifications are subject

to change without notice. In support of Xerox’ environmental leadership goals, this model may contain some recycled components that are reconditioned. The Xerox Total Satisfaction Guarantee applies to equipment under a Xerox warranty or a Full Service Maintenance Agreement and is
subject to certain conditions. Sun and Sun Blade are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States and other countries. Adobe

®

and PostScript

®

are registered trademarks of Adobe Systems, Inc. 09/04.

610P713990B