Xerox 155 User Manual
Supplies
A-10
Installation Planning Guide
Paper care
Once you have purchased your paper, you must be sure it is
stored and conditioned properly, so that it performs optimally in
the printer with a minimum of jams.
stored and conditioned properly, so that it performs optimally in
the printer with a minimum of jams.
Storing paper
Paper has a tendency to curl under the heat that is present
inside xerographic equipment. To minimize the amount of curling,
use paper with low moisture content. Paper with excessive
moisture content has a tendency to jam because of the greater
curl. The maximum recommended moisture content is 5.7
percent.
inside xerographic equipment. To minimize the amount of curling,
use paper with low moisture content. Paper with excessive
moisture content has a tendency to jam because of the greater
curl. The maximum recommended moisture content is 5.7
percent.
Keep these points in mind when preparing your paper storage
area:
area:
•
Store paper in its own wrapper; do not leave it unwrapped or
where it can be damaged by dampness or heat.
where it can be damaged by dampness or heat.
•
Store paper on a flat surface and not on its side or edge.
•
Store reams of paper in a closed cabinet.
•
Always store paper in a cool, dry area. Store on pallets or
shelves, not on the floor.
shelves, not on the floor.
•
Plan ahead and keep at least a day’s supply of paper in the
same area as the printer to allow environmental stabilization
prior to printing.
same area as the printer to allow environmental stabilization
prior to printing.
For more detailed information on paper for Xerox printers, refer
to Helpful Facts about Paper, provided with your printer.
to Helpful Facts about Paper, provided with your printer.