Xerox 155 User Manual

Page of 160
Printer requirements and specifications
6-16
 Installation Planning Guide
Before installation, you must consider the following:
Clearance space requirements where you intend to install the 
printer
Recommended cable lengths and locations (refer to the 
“System connections” chapter of this guide for more 
information)
Delivery access requirements
Floor leveling
Clearance space requirements 
The printer must be installed in a fixed location that provides the 
following clearance space: 
36 inches / 91.4 cm on all sides of each component
78 inches / 198 cm of vertical clearance throughout the entire 
area
24 inches / 61 cm of exclusive operator area in front of each 
component
NOTE:  There must be a total of 50 inches / 126.9 cm of 
clearance space in front of the printer.
Shared space between components
It is best to provide the full amount of clearance space around 
the hardware components. Your environment may require you to 
use shared space between components such as between the 
printer and the controller or between the printer and another 
Xerox printing system. You can share the 36-inch / 91.4 cm 
clearance space around each component, as long as you follow 
these rules: 
Space may be shared only with other Xerox equipment.
Components may share the 36-inch / 91.4 cm general 
service clearance areas, but they may not share the 24-inch / 
61 cm operator area in front of each component. 
There must be 78 inches / 198 cm of vertical clearance 
throughout the entire area.