SATO M-8400RV User Manual
Programming Manual
2. Command Codes
SATO RISC Printers
31
Note:
1. Use of this command will set the Vertical/Horizontal Offset setting
1. Use of this command will set the Vertical/Horizontal Offset setting
of the printer configuration until a new Base Reference Point
command is issued or the setting is changed from the operator
panel.
command is issued or the setting is changed from the operator
panel.
2. This command may be used more than once in a print job.
3. An alternative to using this command is to make changes to your
3. An alternative to using this command is to make changes to your
current Horizontal and Vertical Print Position commands.
Example:
Let’s say the current base reference point is H=1, V=1 and you
wish to move all the fields on your label downward vertically by
150 dots. You could either (1) add the Base Reference Point com-
mand or (2) change all the vertical position commands by an
additional 150 dots.
Example:
Let’s say the current base reference point is H=1, V=1 and you
wish to move all the fields on your label downward vertically by
150 dots. You could either (1) add the Base Reference Point com-
mand or (2) change all the vertical position commands by an
additional 150 dots.
4. For a more detailed example of the Base Reference Point com-
mand, see “Print Area” in this section.
5. The allowable field ranges for this command are:
CL 408
CL 412
CL 608 (VA)
CL 612 (VA)
Horizontal
aaaa
aaaa
-0832 to 0832 -1248 to 1248 -1216 to 1216 -1984 to 1984
Vertical
bbbb
bbbb
0001 to 1424 0001 to 2136 0001 to 1424 0001 to 2136
M8485S
M8490S
M8460S
M8459S
Horizontal
aaaa
aaaa
-1248 to 1248 -1344 to 1344 -1216 to 1216 -0896 to 0896
Vertical
bbbb
bbbb
0001 to 1424 0001 to 2136 0001 to 1424 0001 to 2136
XL 400
XL 410
M8400RV
Horizontal
aaaa
aaaa
-0800 to 0800 -1200 to 1200 -0832 to 0832
Vertical
bbbb
bbbb
0001 to 1920 0001 to 1920 0001 to 1920