SATO M8460S User Manual
Programming Manual
2. Command Codes
SATO RISC Printers
43
Note:
1. Use the Print Position commands (V and H) to locate the new area
1. Use the Print Position commands (V and H) to locate the new area
for the duplicate image.
2. Position of the new target area must not be inside the original
image.
3. If you use the Rotate command, V, H, X and Y axis will be reversed.
4. If the reference area of the target image exceeds the print area, it
4. If the reference area of the target image exceeds the print area, it
will not be printed.
5. The allowable field ranges for this command are:
CL 408
CL 412
CL 608 (VA)
CL 612 (VA)
Horizontal
aaaa
aaaa
0 to 0832
0 to 1248
0 to 1216
0 to 1984
Vertical
bbbb
bbbb
0001 to 1424 0001 to 2136 0001 to 1424 0001 to 2136
M8485S
M8490S
M8460S
M8459S
Horizontal
aaaa
aaaa
0 to 1248
0 to 1344
0 to 1216
0 to 0896
Vertical
bbbb
bbbb
0001 to 1424 0001 to 2136 0001 to 1424 0001 to 2136
XL 400
XL 410
M8400RV
Horizontal
aaaa
aaaa
0 to 0800
0 to 1200
0 to 0832
Vertical
bbbb
bbbb
0001 to 1920 0001 to 1920 0001 to 1920