SATO M8460S User Manual
72
SATO RISC Printers
2. Command Codes
Programming Manual
Off-Line/Pause
Command Structure:
<ESC>@,nn...n
nn...n:
nn...n:
Optional message to be displayed on the LCD.
Maximum of 32 characters
Maximum of 32 characters
Example:
See above
Placement:
Anywhere in the print job between <ESC>A and
<ESC>Z
<ESC>Z
Default:
None
Function:
To specify the printer to come to an off-line state. When used within a
print job, the printer goes off-line after finishing the print job.
print job, the printer goes off-line after finishing the print job.
Input:
<ESC>A
<ESC>@,Load Blue Labels and place printer On-Line
. . . Job . . .
<ESC>Z
Output:
There is no printer output for this command. The printer is placed in
the Off-Line mode as soon as the current print job is finished.
the Off-Line mode as soon as the current print job is finished.
Note:
1. You must press the LINE key on the front panel to return the
1. You must press the LINE key on the front panel to return the
printer to an On-Line status.
2. Remember, when using this command, that if the print job spec-
ifies <ESC>Q10, all ten labels will print before the printer will go
off-line.
off-line.