Ericsson 4900 User Manual

•

Off 

disables automatic cutting. Choose this setting if you want to 

operate the cutter manually, print multiple print jobs without 
cutting, or if you are printing on heavy media that must be cut by 
hand. See page 56 for instructions on operating the cutter manually.

•

Single Cut 

allows images to be printed end-to-end and saves paper. 

With borderless printing, you may see a sliver of the previous or 
next image if you print multiple images in one print job. You will 
see a white margin between print jobs.

•

Double Cut

 extends the space between images and trims each print 

individually. This provides the cleanest edge for borderless printing.

•

Normal  Cut

 allows margin space at the top and bottom of each 

image.

9. Select these additional roll paper options, if necessary:

•

Auto Rotate

 saves paper if your document length is shorter than 

the printable width of the roll. The document is automatically 
rotated 90 degrees and printed crosswise. Be sure to click 

Roll 

Width

 and select the width of your roll paper.

•

Print Page Line 

prints trim lines on the right and bottom edges of 

your pages.

10. When you’re finished, click 

OK

.

Follow the steps in this section to print on cut sheet paper and select settings 
for borderless printing, if desired. (If you’re printing on roll paper, see 
page 69.)

1. On the Properties or Preferences window, make sure the 

Main

 tab is 

selected.