Panasonic KX-P8420 User Manual

Req. All Route
Yes/No [No*]

If source routing is enabled, select 

Yes

 to allow all routers on the network to 

broadcast the presence of the printer to clients, enabling packets from 
clients on the network to travel to the printer by any route.

Resp. All Route
Yes/No [No*]

If source routing is enabled, and 

Req. All Route 

is set to

 No

,

 

select 

Yes

 to 

allow all routers on the network to broadcast the presence of clients to the 
printer, enabling packets from clients on the network to travel to the printer 
by any route.

(

*

=Default setting)

Network protocol setup screens are used to specify and setup TCP/IP 
Ethernet, TCP/IP Token Ring, AppleTalk and IPX (Novell) network protocols.

•

When exiting Setup menus, the printer will automatically restart if 
changes have been made to Network Protocol settings. 

Network Protocol Setup

To advance to the next screen, press the Enter button. Select TCP/IP Setup, 
AppleTalk Setup, or IPX/SPX Setup, depending on your network 
connections.

TCP/IP Setup 

Press the Enter button to view TCP/IP options.

Enable TCP/IP?
Yes/No [No*]

Select 

Yes

 if you have a TCP/IP network connected to the printer over 

Ethernet cabling.

Ethernet IP Address

or

Token Ring IP Address

[127.000.000.001*]

Use this option to assign the printer an Ethernet or Token Ring IP address. 
Press the Continue/Forward button to increment a value. Press the Cancel/
Left button to accept a value and move to the next number to be entered. 
Numbers are entered from right to left. When all values have been entered, 
press the Enter button to accept your selection.

(

*

=Default setting)