Escort EJ-CR-II User Manual

 

 

© 

Escort Data Logging Systems LTD         DATED: 03/07/07                PAGE 9 

 

 

Below illustrates an example for an internal sensor logger (not to scale): 
 

°C  

°C 

  01/03 06:27:29* 19.5

°C  

       

  01/03 06:22:29* 19.7

°C  

  01/03 06:17:29* 19.5

°C  

  01/03 06:12:29* 19.2

°C  

  01/03 06:07:29* 19.5

°C  

Above Specification: 

 

 

30.0->32.0

°C 

: 100 mins 

 

. 

Above 32.0

°C 

: 45 mins 

Below Specification: 

20.0->18.0

°C 

: 55 mins 

Below 18.0

°C 

:  5 mins 

------------------------------------------- 
 
Notes 
•  If the logger has two sensors (such as a EJ-IE or EI-HS loggers) then the other sensor’s 

specifications and log summary will also appear if the sensor is enabled for logging.             
For EJ-IE & EJ-HS loggers, the list of out of specification readings will contain a sensor 
label at the beginning of each line. (“I” for internal sensor, “E” for external sensor and “H” 
for humidity). 

•  During the printing of out of specification readings, the printer may pause at times while 

the ChartReader scans through the logged readings in search of out of specification 
values. 

•  If during printing the paper runs out, the out of specification print indicator will flash rapidly 

and beep, printing will pause. The user can either install a new roll of paper and push the 
print button to resume printing or press the CANCEL 

key to abort printing. 

•  In case the battery voltage drops to an unacceptable level during printing, the out of 

specification print indicator will flash rapidly and beep, printing will pause. The user can 
either plug in external power and push the print button to resume printing or press the 
CANCEL 

key to abort printing.