Panduit LS8 User Manual

 

30 

The Setup Menu 
The setup menu is used to modify the default printer settings.  The setup 
menu should be accessed from the home screen.  To access the setup menu 

press the 

 key.   

 
Use the setup menu to adjust the contrast, heat, time, date, units, language, 
and bar code settings.  Also use the setup menu to transfer files to a personal 
computer or to upgrade your printer’s operating system. 
 
Within the setup menu, scroll up or down using the directional arrows.  Select 
the setting to adjust by pressing ENTER.  Once inside the setting, use the 
arrow to select a parameter to change.  Press ENTER to accept the changes 
and return to the main setup menu screen.   
 
Press SETUP to exit from the setup menu will all changes. 
 
Label Modes 
To edit the label mode, press the LABEL key.  
 

1.  Use the up or down directional arrows to select the desired mode and 

press ENTER. 

 
Available Modes include: 

 

Component 

Vertically centers legend 

Electrical components 

Wiremarker 

Repeats legend until label is filled 

Wire and cable marking 

Terminal 

Places legends at terminal 
locations 

Terminal blocks 

Tape 

Rotates legends 90° clockwise 

Safety/facility ID, pipe 
marking 

Strip 

Repeats legend until label is filled 
and copies legend on two sides of 
middle perforation 

Wire and cable marking 

Network 

Places legends at port locations 

Data communications 
components 

Flag 

Prints legend once at top of label 
and then repeats the legend once 
at the bottom of label 

Wire and cable marking 

Vertical 

Prints legend vertically 

Safety/facility ID, pipe 
marking