Ericsson 7700 User Manual

Page of 228
17
Introduction
|
17
Ink Cartridge Safety Instructions
Keep ink cartridges out of the reach of children and do not drink the 
ink.
Store ink cartridges in a cool, dark place.
If ink gets on your skin, wash it off with soap and water. If ink gets in 
your eyes, flush them immediately with water.
Shake ink cartridges before installing them for best results.
Do not use an ink cartridge beyond the date printed on the cartridge 
carton.
Use up the ink cartridge within six months of installation for best 
results.
Do not dismantle ink cartridges or try to refill them. This could damage 
the print head.
After bringing an ink cartridge inside from a cold storage site, allow it to 
warm up at room temperature for at least three hours before using it.
The IC chip on the ink cartridge retains a variety of cartridge 
information, which allows you to remove and reinsert it freely. 
However, each time the cartridge is inserted, some ink is consumed 
because the printer automatically performs a reliability check.
If you remove an ink cartridge for later use, protect the ink supply area 
from dirt and dust, and store it in the same environment as this product. 
Note that there is a valve in the ink supply port, making covers or plugs 
unnecessary, but care is needed to prevent ink from staining items that 
the cartridge touches.
Do not touch the ink supply port, its surrounding area, or the green IC 
chip on the side of the ink cartridge. Doing so may affect normal 
operation and printing.
Caution: Do not use too 
much force when you 
shake cartridges that 
have been previously 
installed.