Ericsson 7700 User Manual
182
182
|
Solving Problems
Auto Take-Up Reel Error Messages
If you have the optional Automatic Take-Up Reel System, check the
following list for error messages that might appear:
following list for error messages that might appear:
Improving Print Quality
You can often improve print quality by doing the following:
•
Run a nozzle check and cleaning cycle. See page 152 for instructions.
•
Align the print head. See page 156 for instructions.
•
When you send a print job, make sure your print options are set
correctly. For more information, see page 85 (Windows) or page 111
(Macintosh).
correctly. For more information, see page 85 (Windows) or page 111
(Macintosh).
Message
Explanation
Response
TAKE-UP DISCONNECTED
SET AUTO TAKE-UP REEL
SYSTEM IN PRINTER AND
RESTART THE PRINTER
SYSTEM IN PRINTER AND
RESTART THE PRINTER
The Auto Take-up Reel is not
installed correctly.
installed correctly.
Turn the printer off, then install the Auto
Take-up Reel correctly. See page 203.
Take-up Reel correctly. See page 203.
TAKE-UP DISCONNECTED
AUTO TAKE-UP REEL UNIT
IS DISCONNECTED
IS DISCONNECTED
DO YOU CONTINUE?
NO
YES
NO
YES
The Auto Take-up Reel is not
installed correctly.
installed correctly.
Select YES to continue printing without
using the Auto Take Up Reel. Or, select NO,
turn the printer off, then connect the Auto
Take-up Reel (see page 203) and restart the
printer.
using the Auto Take Up Reel. Or, select NO,
turn the printer off, then connect the Auto
Take-up Reel (see page 203) and restart the
printer.
TAKE-UP ERROR
CHECK THE STATUS OF
AUTO TAKE-UP REEL UNIT
AND RESTART THE
PRINTER
AUTO TAKE-UP REEL UNIT
AND RESTART THE
PRINTER
Paper is not loaded on the reel
correctly.
correctly.
Press the
button and load the paper
TAKE-UP ERROR
IS ANYTHING
OBSTRUCTING THE
TAKE-UP REEL SENSOR
SYSTEM?
OBSTRUCTING THE
TAKE-UP REEL SENSOR
SYSTEM?
LOAD PAPER AGAIN
The Auto Take-up Reel is not
winding paper.
winding paper.
Make sure nothing is obstructing the
sensor. Press the
sensor. Press the
button and load the
paper correctly; see page 204.