Ericsson 7700 User Manual

Before you load roll paper onto the take-up reel core, check the following:

•

Turn off the Auto Take-Up Reel to avoid injury.

•

Make sure that the leading edge of the roll paper is straight.

1. Plug in the power cord.

2. Make sure the printer is on and the   Auto Take-up Reel icon appears 

on the LCD panel.

3. Make sure that the roll paper is loaded in the printer properly. For 

instructions, see page 59.

4. Press the l button to select 

(Auto Cut Off).

5. Press the d button to feed the roll paper out of the printer.

Continue with the steps in the next section if you want to wind your prints 
forward, or page 206 if you want to wind your prints backward.

WARNING: Make sure 
the Auto Take-Up Reel is 
installed properly and is 
turned off before loading 
paper. If it is installed 
incorrectly or operates 
unexpectedly, bodily 
injury may occur.